How to Stop Your Dog Falling Into the Footwell on Car Trips
Why Dogs Slide Into The Footwell
A dog seat cover that stops your dog falling into the footwell is one built on a rigid base — a hard-bottom cover that sits level across the bench rather than a sling that sags into the gap. Dogs end up on the floor because a back seat is a sloped, slippery, moving surface. The cushion tilts backwards, the upholstery offers no grip, and under braking a standing dog has nothing to brace against. If you want a dog seat cover that stops your dog falling into the footwell, the mechanism matters far more than the fabric: the cover has to turn that slope into a flat, level floor and close the gap in front of the seat.
Three things usually combine. The seat base slopes down towards the backrest, so gravity is already working against your dog. Leather, vinyl and tightly woven cloth give claws nothing to hold. And the drop between the front of the bench and the back of the front seats is a ready-made hole that a dog slides into nose-first at the first roundabout. Anxious dogs make it deliberate — they climb down behind the driver's seat because the footwell feels enclosed.
What The Footwell Actually Risks
On the driver's side it puts a dog within reach of the pedals. On either side, a dog that wriggles under a front seat can wedge against the seat rails and be unable to reverse out, and floor-level vents blow air straight at them. A dog braced in a hole also cannot shift its weight as the car moves.
Will A Hard-Bottom Cover Suit My Car?
Our hard-bottom covers, travel bed and the safety buckle and support strap sets that come with the kits are made for the back seat of sedans, SUVs, utes and 4WDs, and go out to addresses anywhere in Australia. They are not a cargo barrier, a crate or a harness — so if your dog travels in the boot of a wagon or hatch, a cover is not the product for that, and a barrier is not something we make. For a dog that rides on part of the back seat beside a passenger, our Single Seat Cover raises and walls one spot rather than the whole bench. If you are unsure about your model, check it on the fit check page or email your make, model and year to support@petride.com.au before you order.
Hammock, Bench And Hard-Bottom Covers Compared
All three cover types are sold as footwell solutions, but only one of them removes the slide. A hammock is slack fabric strung between the headrests: it blocks the gap after your dog has already slipped, and it sags under weight, so a big dog is standing on an unstable sling. A flat bench cover protects upholstery but keeps the seat's original slope. A hard-bottom cover is a rigid insert — high-density foam over a structured board — that sits level and does not collapse into the gap. Watch what the base is made of, too: budget covers built on corflute, a fluted plastic sheet, bend and warp under a real dog.
| Cover type | What it does about the footwell | Where it struggles |
|---|---|---|
| Hammock (fabric sling) | Blocks the gap with fabric once the dog has already slid forward | Sags under a medium or large dog; the dog is standing on a moving surface and keeps sliding |
| Flat bench cover | Little — the seat keeps its original slope and the gap stays open | Best thought of as upholstery protection, not footwell prevention |
| Hard-bottom cover (rigid base, bolstered walls) | Replaces the slope with a level platform and fills the gap with a solid floor | Takes up the bench it covers, so measure before buying if a passenger shares the seat |
When Is A Hammock Still The Right Buy?
A hammock is still the sensible buy in some cases: a small, light dog in a hire car, or a cheap stopgap you need for one trip. For a dog heavy enough to deform slack fabric, our Hard-Bottom (Full) Car Seat Cover is built for this — the firm base cannot fold into the footwell, and the raised bolstered sides stop a dog sliding off the edge of it. It is rated 4.8 out of 5 from 600 reviews.
A Cover Is Not A Legal Restraint
A cover keeps your dog on the seat during normal driving; RSPCA Australia's policy on transporting companion animals states that they must be safely restrained when travelling in a vehicle, and a harness is what attaches your dog to the car. You want both, and our covers include a built-in harness slot so the two work together rather than fighting each other.
What Do The Road Rules Say About Restraining A Dog?
That is a question for your own state or territory rather than for us — RSPCA Australia notes that the rules differ in every state and territory and directs owners to their own jurisdiction's road rules, so check those before you set the car up. The RSPCA also advises that where a dog must be restrained, the restraint should be a vehicle-specific harness that has passed safety testing, used on the back seat, rather than an ordinary walking harness, and CHOICE publishes independent guidance on choosing and fitting dog car harnesses. None of our covers is a crash restraint and nothing here should be read as one: the harness slot exists so that whatever restraint you choose can be used with the cover fitted, on a surface your dog can actually stand on.
Fitting A Cover So It Stays Put
Two different things slide, and they need different fixes. The dog sliding on the cover is solved by a level base, a grippy top and raised side walls. The cover sliding on the seat is solved by anti-slide backing plus anchor points that are actually tensioned.
- Step one: measure the bench width and depth, and check whether your headrests come out, then match those numbers on the fit check page.
- Step two: clear the seat, lay the base flat with the anti-slide backing against the upholstery, and push it hard into the seat crease.
- Step three: loop the headrest straps and pull them tight enough that the front edge cannot lift when you push down on it.
- Step four: feed your dog's harness tether through the harness slot and clip it to the seatbelt before each trip, not once the dog is on board.
- Step five: check the middle seatbelt and any child seat you still need — if a passenger shares the bench, fit the Single Seat Cover rather than a full one.
Fitting takes about two minutes with no tools, and the whole thing lifts out again when you need the seat back.
Fabric, Cleaning And Hot Days
A waterproof top can be wiped down after mud, drool or a car-sick puppy; a water-resistant one only buys you time to mop. Our Hard-Bottom (Full) Car Seat Cover is built for that side of it: heavy-duty 600D Oxford fabric with a waterproof, wipe-clean top and a machine-washable cover, so the routine is wipe after a wet or muddy trip and wash the cover when hair builds up past what a brush will shift.
Dark, waterproof-backed fabric can get hot in a car parked in the sun, as any upholstery does. On a hot day, park in shade, run the air conditioning before the dog gets in, and feel the surface with your hand first — the same check you would do on bitumen.
When Footwell Diving Is Anxiety, Not Gravity
Some dogs are not falling into the footwell, they are choosing it. A dog that climbs down behind the driver's seat every trip, even on a flat platform, is usually looking for an enclosed, low place to hide from the motion — the same instinct that puts them under a table in a storm. A level floor alone will not change that behaviour.
What helps is making the seat the den instead. Our SteadyRide Travel System pairs the walled hard-bottom platform with a Plush Custom-Fit Travel Bed, so your dog has bolstered sides to lean into and something soft that smells familiar, rather than a hard, open bench. Build it up with short trips before long ones, starting with the engine off and the door open. If the diving comes with drooling, retching or panting that does not settle, that is a vet conversation about motion sickness or anxiety, not a gear problem.
Frequently asked questions
Can a passenger or child seat still share the back seat?
Yes, if you size the cover to the space. A full-bench hard-bottom cover takes the whole back seat. Where a person or child seat needs a spot, fit the Single Seat Cover to one side instead and leave the outboard seatbelt and anchor points clear.
Will a hard-bottom cover mark leather seats?
The rigid base spreads a dog's weight rather than letting claws concentrate it in one spot, and the backing sits between the dog and the upholstery. Brush grit off the underside before refitting, since trapped grit is what scuffs leather over time.
Does the back seat still fold down with a cover fitted?
Not while the cover is in place — a rigid base sits across the bench and the headrest straps hold it there. It lifts out without tools, so fold the seats after removing it, then refit.
Is it suitable for a dual-cab ute or a third-row vehicle?
Dual-cab back seats are shallower than most SUV benches, and third rows and captain's chairs vary a lot. Check your model and seat measurements on the fit check page rather than assuming a generic size, and ask at support@petride.com.au if your seat is an odd shape.
What about two dogs, or one big and one small?
A full-bench cover suits two dogs sharing the back seat, since the smaller one is usually the one that gets pushed onto the floor. Raised side walls and a level floor mean neither dog is bracing on a slope.
What does it cost, and what if it does not suit my car?
Prices are shown in Australian dollars including GST on each product page, and shipping is free Australia-wide. Every order carries a 60-day money-back guarantee from delivery on unused items in original, resaleable condition — email support@petride.com.au for a return authorisation first. Each cover is also covered against faults in materials and workmanship, such as a seam, zip, buckle or the hard base, under a workmanship warranty; send your order number and a couple of photos and it is usually looked at the same day.
